ADD-ON PARTS
DRIVE TRAIN COMPONENTS
AUTOMATIC TRANSMISSIONS
MANUAL TRANSMISSIONS
FLYWHEELS
clutch systems
CLUTCH SYSTEMS
Clutch systems consist of several components that are sometimes exposed to the highest stresses as for example extreme torques.
PartsTec's clutch systems segment
includes the following product groups
• CLUTCH PRESSURE PLATES: PTA200-xxxx
• CLUTCH DISCS: PTA201-xxxx
• CLUTCH KITS WITH FLYWHEEL: PTA202-xxxx
• CLUTCH ACCESSORIES: PTA203-xxxx
• CLUTCH KITS: PTA204-xxxx
• RELEASE BEARINGS: PTA205-xxxx
• HYDRAULIC CLUTCH RELEASE SYSTEMS: PTA206-xxxx
• CLUTCH MASTER CYLINDERS: PTA207-xxxx
• CLUTCH PILOT BEARINGS: PTA208-xxxx
The clutch is operated with the clutch pedal and the clutch release system. It is a separable connection in the transfer of power between engine and transmission and makes it possible to start off and to change gears in the transmission.
The vehicle manufacturers' instructions should absolutely be followed before installing a clutch system. PartsTec generally recommends to check and fully replace the entire clutch system each time a vehicle is serviced.
FLYWHEELS
Flywheels in vehicles with powerful engines of high torque are indispensable to effectively damper the drive train.
PartsTec's flywheel segment
includes the following product groups:
• FLYWHEELS
(conventional): PTA210-xxxx
• DUAL-MASS FLYWEEHLS: PTA211-xxxx
It is the function of flywheels to damper and, to the extent possible, eliminate torsional vibrations at load changes of the engine and any resulting noise in the drive train of vehicles.
With a conventional flywheel and torsion-damped clutch disk, the torsional vibrations are transferred to the gear box unfiltered.
With a dual-mass flywheel, however, the engine's torsional vibrations are filtered through a damping system and no stress is put on the transmission.
For the purpose of prevention, PartsTec generally also recommends replacing the entire clutch.
It is also important to use the tools recommended by vehicle manufacturers for the installation and to follow the installation instructions.
MANUAL TRANSMISSIONS
Most products for manual transmissions are smaller components. If damaged, they can heavily affect a vehicle's performance.
PartsTec's shift gearbox segment
includes the following product groups:
• ROLLING BEARINGS
(deep groove ball and tapered roller bearings, needle roller bearings etc.):
PTA220-xxxx
• SYNCHRONISER RINGS: PTA221-xxxx
• DETENT PINS: PTA222-xxxx
• GEARS: PTA223-xxxx
• TRANSMISSION SHAFTS FOR MANUAL TRANSMISSIONS:
PTA224-xxxx
PartsTec's diverse range of products for manual transmissions makes a significant contribution to the smooth gear function of the gears in the gearbox.
AUTOMATIC TRANSMISSIONS
Most products for automatic transmissions are smaller components. If damaged, they can heavily affect a vehicle's performance.
PartsTec's automatic transmissions segment
includes the following product groups:
• ROLLING BEARINGS
(deep groove ball and tapered roller bearings, needle roller bearings etc.):
PTA230-xxxx
• TORQUE CONVERTERS: PTA231-xxxx
• ROLLER CLUTCHES: PTA232-xxxx
• BRAKE BANDS: PTA233-xxxx
• TRANSMISSION SHAFTS FOR AUTOMATIC TRANSMISSIONS:
PTA234-xxxx
Unlike with manual transmissions, there is only one main transmission shaft in the closed transmission housing from which the individual gears are shifted via planetary transmissions.
PartsTec's diverse range of products for automatic transmissions makes a significant contribution to a consistently smooth operation of the transmission.
DRIVE TRAIN COMPONENTS
Components for drive trains are important parts in a vehicle. They are essential to driving comfort.
PartsTec's drive TRAIN components segment
includes the following products:
• DRIVE SHAFTS: PTA240-xxxx
• PROPELLER SHAFT BEARINGS: PTA241-xxxx
• DRIVE SHAFT JOINTS: PTA242-xxxx
• UNIVERSAL JOINTS: PTA243-xxxx
• FLEXIBLE DISCS: PTA244-xxxx
• TRIPOD JOINTS: PTA245-xxxx
It is the function of drive shafts to transmit power between transmission and wheel, and also to transmit the steering process to the wheels.
With its drive components product range, PartsTec guarantees vibration-free drive and thus supports a vehicle's comfortable driving style.
ADD-ON PARTS
Add-on parts for the drive train are of great importance also to a vehicle's safety.
PartsTec's add-on pieces segment
includes the following products:
• GEARBOX MOUNTINGS: PTA250-xxxx
Gearbox mountings are used to damper noise and vibration of the drive train and absorb the gearbox' static load.
If repair is needed, PartsTec generally recommends replacing all gearbox bearings as only this ensures the smooth and safe bearing of a gearbox.