ADD-On Parts

Valve Train

Chain Drive

Belt Drive

  •  

     

     

    Formular wird gesendet...

    Auf dem Server ist ein Fehler aufgetreten.

    Formular empfangen.

BELT DRIVE

Belt drive components are important products in motor vehicle engines. They are used in both petrol and diesel drives.

The components contribute significantly to engine timing and the drive of auxiliary units including the power steering pump, water pump, alternator and air conditioning compressor.

PartsTec’s belt drive components segment

includes the following product groups:

 

  • IDLER PULEYS:  PTA100-xxxx

 

  • BELT TENSIONERS

(fixed, semi-automatic or automatic tensioners):

     PTA101-xxxx, PTA102-xxxx, PTA103-xxxx

 

  • OVERRUNNING ALTERNATOR PULLEYS: PTA104-xxxx

 

  • CRANKSHAFT DAMPERS: PTA105-xxxx

 

  • BELT DRIVE KITS: PTA106-xxxx

 

  • BELTS

for the timing drive (timing belts) or

auxiliary drive (multi-ribbed belts or V-belts)

     PTA107-xxxx, PTA108-xxxx,  PTA109-xxxx

The belts and corresponding components are exposed to various stresses in petrol and diesel engines, including high engine speed, oscillations and rapid temperature changes in the engine compartment. This may negatively affect the functioning of belts, tensioning units, idler pulleys and overrunning alternator pulleys.

 

PartsTec therefore highly recommends adhering to the replacement intervals defined by the vehicle manufacturers and replacing all of the belt drive's components in good time. PartsTec makes an important contribution to a long service life of engines through its delivery programme for belt drive components.

 

 

CHAIN DRIVE

Chain drive components are important products in engines. They are used in both petrol as well as diesel aggregates. These parts contribute significantly to engine timing and drive, for instance of the oil pump.

PartsTec's chain drive components segment

includes the following product groups:

 

  • CHAIN TENSIONERS

(mechanical and hydraulic): PTA110-xxxx

 

  • GUIDE RAILS: PTA111-xxxx

 

  • CHAIN SPROCKETS: PTA112-xxxx

 

  • TIMING CHAINS

(Sleeve, roller, or toothed chains): PTA113-xxxx

 

  • TIMING CHAIN KITS: PTA114-xxxx

Unlike belt drives, chain drives are resistant to rapid temperature changes in the engine compartment. Usually it is completely maintenance free. At the same time, the chain drive is exposed to the usual signs of wear such as chain elongation or blocking of the chain tensioner through dirt or dirty oil. The guide rails may also be exposed to increased tear or the chain sprockets' tooth flanks may contract. Therefore, the entire chain drive needs to be maintained after a mileage of approx. 100,000 km. It would be useful to replace the components mentioned upon maintenance.

 

PartsTec's timing chain kits have been developed for highest quality and include all necessary parts of the chain drive that are susceptible to wear. This guarantees smooth replacement.

 

Of course, all components necessary for the chain drive are also available individually. However, only the complete replacement of all components guarantees smooth operation and a long service life of engines.

 

PartsTec therefore highly recommends adhering to the replacement intervals defined by the vehicle manufacturers and replacing all of the chain drive's components in good time.

 

PartsTec's comprehensive range of chain drive components offers integrated solutions for repair and thus makes a significant contribution to the customer satisfaction of garages.

 

VALVE TRAIN

Valve train components are usually small but nonetheless essential components in engines. They contribute significantly to optimizing the engine timing and valve lash in the valve train. These parts contribute significantly to reducing consumption figures and harmful emissions of petrol and diesel engines.

PartsTec's valve train components segment

includes the following product groups

 

  • HYDRAULIC TAPPETS: PTA120-xxxx

 

  • MECHANICAL TAPPETS: PTA121-xxxx

 

  • HYDRAULIC PIVOT ELEMENTS:  PTA122-xxxx

 

  • HYDRAULIC INSERT ELEMENTS: PTA123-xxxx

 

  • ROCKER ARMS: PTA124-xxxx

 

  • FINGER FOLLOWERS: PTA125-xxxx

 

  • CAMSHAFT ADJUSTERS: PTA126-xxxx

 

  • VALVES: PTA127-xxxx

 

  • VALVE SHAFT SEALINGS: PTA128-xxxx

 

  • VALVE TRAIN SETS: PTA129-xxxx

Valve train components are exposed to various stresses in engines, including dirty or old engine oil, high engine speed, oscillations, and extremely high temperatures. This may negatively affect the functioning of valve trains. PartsTec therefore highly recommends thorough maintenance of the engine of any vehicle after a mileage of 100,000 km at the latest.

 

PartsTec's valve train sets are a comprehensive solution and contribute significantly to a long service life of engines.

 

ADD-ON PARTS

Add-on parts for engines are important components for its functioning. They also play a crucial role in vehicle safety.

PartsTec' add-on parts segment

includes the following product groups:

 

  • ENGINE MOUNTINGS: PTA130-xxxx

 

  • CYLINDER HEADS: PTA131-xxxx

 

  • CYLINDER HEAD SCREWS:  PTA132-xxxx

 

  • CYLINDER HEAD GASKETS: PTA133-xxxx

With conventional engine mountings, environmental influences and ageing make the rubber brittle, leading to uneven drivability of vehicles upon load changes. For safety reasons, PartsTec generally recommends replacing and renewing all engine bearings in this case.

PartsTec’s belt drive components segment

includes the following product groups:

 

  • IDLER PULEYS:  PTA100-xxxx

 

  • BELT TENSIONERS

(fixed, semi-automatic or automatic tensioners):

     PTA101-xxxx, PTA102-xxxx, PTA103-xxxx

 

  • OVERRUNNING ALTERNATOR PULLEYS:

    PTA104-xxxx

 

  • CRANKSHAFT DAMPERS: PTA105-xxxx

 

  • BELT DRIVE KITS: PTA106-xxxx

 

  • BELTS

for the timing drive (timing belts) or

auxiliary drive (multi-ribbed belts or V-belts)

     PTA107-xxxx, PTA108-xxxx,  PTA109-xxxx